Our backyard bomber includes everything needed to convert a 10x20 carport into a fully functional light dep greenhouse. By purchasing a carport locally, we can avoid high shipping costs and send the retrofit kit USPS. Choose from chain rollup ($1,750) or fully automatic $2,250).
16×60 6 mil string reinforced greenhouse cover.
“Cloudy, half transparent” look.
10 in stock
Fresh air intake shutter.
Shutter typically stays closed keeping your greenhouse warm.
When the exhaust fan turns on, negative pressure is created therefor opening shutters and bringing in fresh air.
8 in stock
This direct solar powered exhaust fan moves big air!
Virtually indestructible variable speed brushless motor.
Runs directly off the sun during the day, no batteries needed.
8 in stock
36v 295 watt solar panels for solar exhaust fans, battery charging and DIY applications.
30" fresh air intake shutter/louver. Overall size 33 in x 33 in, galvanized steel, shutter size 30-1/2 in x 30-1/2 in, frame depth 3", open depth 6 1/4 in.
110/220vac J&D exhaust fan with shutter. 42" rough opening, 10,500CFM.
36″ light trap, breathable wall. Comes assembled.
Out of stock
40×100 9 mil woven anti condensate greenhouse cover
“Cloudy, half transparent” look.
10 in stock
8 mil high quality blackout light deprivation plastic.
Best in industry.
Resists stretching, punctures and tears.
Complete 100% blackout.
7 in stock
6 mil string reinforced “cloudy” greenhouse cover.
40×100 roll.
9 in stock
6′ channel and vinyl coated wiggle wire. Pack of ten.
12' sections available for local pickup or full kit deliveries.
10 in stock
The air blower inflation kit uses a blower fan to push air between two layers of greenhouse plastic. This improves insulation efficiency and reduces condensation inside of the greenhouse. We don't recommend using this kit with our external frame blackout kits but functions great with internal frames and standard greenhouses. 110VAC, 0.42 amps.
Includes 60 cm blower, exhaust air deflector, and mounting bracket, 48" inlet air hose, inlet damper/air regulator
Simple and cost effective greenhouse automation.
These high quality kits are built to last from 1 5/8
American made steel tubing. Our automated blackout
system enables multiple up/down presets in a 24 hour period
Both 110VAC and solar off-grid options available...
Good off-grid solution
10 in stock
Makes greenhouse ventilation a breeze! (Get it?)
Simply raise and lower the entire sidewall of your greenhouse with a manual crank from Light Dep Solutions. Similar to a socket wrench, it will lock in place and not let gravity wind itself back. This is a must for all greenhouse growers.
Connects to 1 3/8″ rolling bar. Don’t forget 1″ tarp clips!
8 in stock
Increases snow load and structure rigidity.
Package of two connectors good for one complete truss. 1 3/8"
Out of stock
Our Interior frame offer some unique advantages over the exterior model.
The entire blackout system operates on a isolated frame within
the main structure. Components are protected from the elements.
and function better in windy and snowy conditions. The extra frame creates
an air pocket similar to a dual pane window increasing insulation.
Simple controller for two light deprivation motors. Made in house by Light Dep Solutions. 110AC TO 24VDC
10 in stock
High quality light dep motors. Includes 1 3/8" shaft adapter.
10 in stock
Locking manual crank rollup crank. Simple, effective and clean. Red unit.
10 in stock
Easy, simple, and inexpensive light deprivation!
Manual light deprivation kit with chain rollup system.
Similar to the automated motor design, two rolling bars rollup to meet at the center peak of the greenhouse.
Very nice, clean and inexpensive method of light deprivation!
***Comes with correctly sized 1 3/8″ rolling bar shaft adapter!***
9 in stock
Adapts to 1 3/8″ guide pole.
Uses this creeper instead of telescoping method for motor guide arm.
10 in stock
Manual light deprivation retrofit kit. Turns almost any existing structure into a light dep greenhouse.
9 in stock
Automatically raise and lower the sidewalls of a greenhouse with temperature presets. Included battery backup allows for 4+ days of operation without AC power. Kit includes two sidewall motors, thermostatically controlled motor controller, motor wire, 500 watt-hour lithium battery bank, 110vac charger, shaft adapters, 20 1 3/8" tarp clips, and instructions.
Solar powered greenhouse exhaust fan. 40" with shutter. Brushless, variable speed DC motor allows for ultra-quiet, smooth operation. Can be powered directly from solar panels, a battery, or a normal household outlet. 4 amps, 400 watts.
Solar powered hanging fan
This fan features an amazing performance combined with a light weight hanging mounting bracket for permanent fixture of the fan. Included with the fan is a 25 ft fan cord for connection to a 12 volt 100 Watt solar panel or an existing 12 volt solar and battery system. High performance air movement makes this a great choice for horse stalls, greenhouse, shop and any where you might need it. Excellent for power outages, off grid locations!
Features:
Fan Specifications:
Fan Connection Cord
Fan Dimensions:
3 Speed - Performance Settings:
This fan is outfitted with MC4 connectors for direct connection into a 100 watt solar panel. This fan can also be connected to an existing 12 volt solar and battery storage system for night time and cloudy day running!
7 in stock
Automatically raise and lower the sidewalls of a greenhouse with temperature presets. Runs off a solar-charged lithium battery bank. Kit includes two sidewall motors, dc thermostatically controlled motor controller, 60-watt solar panel, MC4 connectors, and solar cables, 500-watt hour lithium battery bank, 20 1 3/8" tarp clips, and instructions.
Our standard greenhouses offer cost effective solutions to extend the growing season and can always be retrofitted to light dep In the future. Built to last from 1 5/8” American made steel tubing and includes manual crank roll up side walls for natural ventilation.